That's right! Another jig. It's made out of 1-1/4" by 1/8" square stock, 60-3/4" long. The two pieces welded on each end are 3/4" wide by 3-1/2" long by 1/8" thick. I made this up pretty quick and it really works slick to hold the vacuum hose while I blow out through the other hole.
I just bungee it to the fixture. Then the clamps just squeeze together the 3/4" metal to the rocker.
You can see that you can get about all of the 24" of tygon in there.
Just wanted to show you what the metal looks like, bad picture of it.
